Caddo Mills, Texas 9–5 CST 903-527-2006 Made in America

GM swap hardware & carbon fiber

Transplanting a GM LS engine in your project and want to retain the factory speedometer and gauge cluster?

Our kit allows you to do just that. We machine tail housing kits that put a 4L60E or 4L80E behind your car's original shifter and cable-driven speedo. And we lay carbon covers so the top of the motor looks like somebody cared.

Tail housing kits

Cable drive off an electronic overdrive, shifter back where it belongs. Keep your gauges. Skip the electric conversion.

Carbon fiber covers

One- and two-piece LS covers, aircraft-grade carbon, infused on our own table. Hardware's in the box.

Custom fabrication

Tooling and one-off composite work when the part you need was never made.

Keep your dash

Nothing on the dash gives it away.

Here's what usually happens. You go electronic overdrive, there's no cable drive on the tail housing, so the original speedo is dead. Now you're buying a full electric gauge set and hacking up a dash somebody spent fifty years not hacking up.

Our kits put a mechanical take-off back on the transmission. The gauges that came in the car stay in the car and read true. Fuel injection, overdrive, and an interior that still looks stock.

Featured parts

The four we ship most.

{{ item.category }} {{ item.name }} {{ item.short }}

{{ item.priceLabel }}

Get the gears right the first time

Right gears the first time.

Tire diameter and rear gear in, drive and driven tooth count out. No guessing, no second order for the gear you should have bought.

Out of the shop

Parts we've built

Southwest Fabrication

Machined, laid up and assembled in Caddo Mills, Texas.

Every part on this site comes out of our own shop. Nothing drop-shipped, nothing rebadged.

“His company makes products that are beyond well made. Doug is also a very honest person. Great products, and a great company to work with — I highly recommend them.”

Zack Farah
Owner — Gearstar Performance Transmissions

Tools

Speedometer gear calculator

Tire diameter and rear gear ratio. That's it. Bring the numbers to checkout and the kit ships with those gears in it.

Tire diameter (inches)

Rear axle gear ratio

Drive gear tooth count

Measure loaded, on the ground — not off the sidewall. Between sizes, go bigger and call us.

Your combination

{{ comboLabel }}

{{ driveTeeth }}T drive gear
{{ drivenRounded }}T driven gear

Exact result {{ drivenExact }} teeth — rounded to {{ drivenRounded }}. {{ fitNote }}

Every drive gear, same tire and ratio

Drive gear	Driven, exact	Driven, use	Error
{{ row.drive }}T	{{ row.exact }}	{{ row.use }}T	{{ row.err }}

The math

20168 ÷ tire diameter × gear ratio × drive gear teeth ÷ 1001 = driven gear tooth count. For your numbers: 20168 ÷ {{ tire }} = {{ step1 }}, × {{ ratio }} = {{ step2 }}, × {{ driveTeeth }} = {{ step3 }}, ÷ 1001 = {{ drivenExact }}.

Kits that carry this

{{ kit.name }} {{ kit.priceLabel }}

Shop

Filter by what's actually bolted in the car.

{{ resultLabel }}

{{ item.category }} {{ item.name }} {{ item.fitLabel }} {{ item.priceLabel }}

Nothing in the catalog matches that yet.

{{ current.category }}

{{ current.name }}

{{ current.priceLabel }}

{{ current.long }}

This kit ships with your gear combination

Run the calculator and bring the tooth count to checkout. Yours right now: {{ comboLabel }} on a {{ tire }}" tire with {{ ratio }} gears.

Fits

{{ row.k }}

{{ row.v }}

Built to order in Caddo Mills. Need it sooner than that? Call.

Cart

Nothing in the cart yet.

Part	Qty	Line
{{ line.name }} {{ line.category }} · {{ line.priceLabel }} ea	{{ line.qty }}	{{ line.lineLabel }}

Subtotal{{ subtotalLabel }}

Shipping lower 48{{ shippingLabel }}

Total{{ totalLabel }}

Free shipping to the lower 48, no minimum. Shipping to Alaska, Hawaii or a US territory is quoted by hand — call 903-527-2006 and we'll price the freight to your address.

Checkout

Your vehicle

We cut your gears to these numbers. Get them right — the calculator fills the tooth count in for you.

Year, make, model

Engine

Transmission

Tire diameter (in)

Rear gear ratio

Drive gear

Driven gear

Calculated combination: {{ comboLabel }} ·

Ship to

First name

Last name

Email

Street address

City

State / ZIP

Payment

Card number

Expiry

CVC

Prototype only — no card data is collected or sent anywhere.

Order

{{ line.name }} × {{ line.qty }} {{ line.lineLabel }}

Shipping lower 48{{ shippingLabel }}

Total{{ totalLabel }}

Gears to cut: {{ comboLabel }}

Parts are cut to the combination above. All sales are final — see returns. Call 903-527-2006 if you want us to check the numbers first.

Southwest Fabrication

Order {{ orderNumber }}

Thanks — we're on it.

Confirmation's on its way, tracking follows when it ships.

We're cutting your gears to {{ comboLabel }}. If that's wrong, call 903-527-2006 before it goes on the machine.

Services

Resin infusion

Closed-mould vacuum infusion. Light, repeatable, and finished well enough to sit on top of a motor at a show.

01

Tooling

We pull a mould off your part, or cut the plug from scratch when there's nothing to copy.

02

Lay-up and infusion

Dry fabric laid, bagged, pulled down under vacuum, resin drawn through in one pass. No dry spots, no resin you're carrying around for nothing.

03

Finish

Trimmed, drilled, clear-coated, hardware included. Goes on the car the day it lands.

From the infusion table

Race car body panels, Corvette hoods, a carbon seat, and the Norwood race car bodywork — bagged, infused and pulled in our own shop.

{{ s.title }} — {{ s.note }}

Got a part in mind?

Send photos, dimensions, and how many you need. If infusion's the wrong process for it we'll tell you that instead of taking your money.

Testimonials

What customers say

If you'd like to send us feedback about your experience working with Southwest Fabrication, or about any of our products, feel free to online and let us know. We'd love to hear your thoughts.

{{ r.quote }}

{{ r.name }}

{{ r.role }}

Worked with us? Tell us how it went.

GM tail housings

Transplanting a GM LS engine in your project and want to retain the factory speedometer and gauge cluster?

Our kit allows you to do just that. It puts a factory mechanical speedometer take-off back on a modern electronic overdrive, at the original angle, with the shifter still where the car's linkage expects it.

4L60E, 4L65E, 4L70E, 4L80E and 700R4. VSS capability stays intact, so a computer that wants a speed signal still gets one.

The problem

Electronic overdrives left the factory with no cable drive. Swap one in and the original speedometer goes dead, which usually means a full electric gauge set and a cut-up dash.

What the kit does

A machined housing with a mechanical take-off, a 40-tooth reluctor wheel and a 15-tooth drive gear. The cable threads on where it always did and the factory gauge reads true.

What you keep

Original cluster, original shifter location, original tunnel. VSS output is retained for the ECU. Nothing on the dash gives the swap away.

Fitment

Find your transmission, then order the matching kit.

Transmission	Kit	Speedometer	Lead time
{{ r.trans }}	{{ r.kit }}	{{ r.speedo }}	{{ r.lead }}

The kits

Housings and speed kits ship with gears cut to your calculated tooth count.

{{ item.category }} {{ item.name }} {{ item.short }}

{{ item.priceLabel }}

Before you order

Three numbers we need.

Tire diameter, rear axle ratio and transmission model. Those three set the drive and driven tooth count, and the calculator works it out for you and carries the answer into the order.

If you are between sizes or running an odd rear gear, call the shop at 903-527-2006 and we will cut it to suit.

The tail housing itself is machined in house to accept the mechanical speedometer kit — the boss, the bore and the gear index are all cut here, not bought in.

Install guide (PDF)

Composites

Out of the shop

Parts we've laid, moulds we've cut, and cars they went on. Some of this is catalog work, some of it was one car's problem that nobody else would solve.

{{ w.title }} — {{ w.note }}

Got something nobody makes?

Send photos and dimensions. If we've built something close, we'll show you the part instead of describing it.

About

A small shop in East Texas that makes the parts it sells.

Southwest Fabrication started because the parts to put a modern GM driveline in an old car either didn't exist or didn't fit. So we made them — for our own cars first, then for everybody who asked.

Everything in the catalog is machined, laid up or assembled here. Nothing's drop-shipped, and when you call you get the guy who made the part, not a call center.

This page is a placeholder. Send the real history and the names and we'll set it properly.

Southwest Fabrication

Made in America.
Proudly manufactured in Texas.

Tell us about the build

Year, make, engine, transmission. Tire size and gear ratio if you've got them. Photos never hurt.

Name

Email

Phone

Vehicle

What are you after?

Tire diameter

Rear gear ratio

What do you need?

Sent — prototype only, nothing left the page. Normally you'd hear back inside a business day.

Shop

903-527-2006
Monday to Friday, 9–5 CST

Where we are

Caddo Mills, Texas
Full street address to confirm

Elsewhere

Facebook
YouTube

Tech notes

Build write-ups and fitment guides — the stuff we end up explaining on the phone twice a week.

{{ post.kicker }}

{{ post.title }}

{{ post.dek }}

{{ post.meta }}

Staff access

Sign in to the shop console

Orders, part pricing and inventory live here. This is for shop staff — customers never need an account to buy a part.

Owner console

{{ authLabel }}

Orders on the left, the SEO agent on the right. The agent is the module from your CRM bundle, re-pointed at swfabrication.com — same audit, rank tracking, 404 capture and Claude action plan.

Recent orders

Order	Customer	Parts	Gears	Total	Status
{{ o.id }}	{{ o.customer }}	{{ o.parts }}	{{ o.gears }}	{{ o.total }}	{{ o.status }}

Inventory

Part	On hand	Lead time
{{ s.name }}	{{ s.onHand }}	{{ s.lead }}

SEO agent

Bi-weekly audit · 1st and 15th, 6:00 AM CT

{{ seoScore }} health score
last run {{ lastRun }}

{{ r.k }}

{{ r.v }}

Claude's action plan

{{ a.priority }} {{ a.title }}

{{ a.body }}

Wiring

Drop portable-agent/ into the new Node server, edit seo-agent.config.ts — site URL, page list, brand, business context — and call registerSeoAgent(app, config). Nothing else in the module is site-specific. Full source is in the project under seo-agent/.